Table of Contents
Advertisement
SKYZER TECHNOLOGIES
13.0
INTERFACED
OFF
14.0
SWIPE START
ON
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
Press F1 to enable or disable the INTERFACED function followed by ENTER.
NOTE: Reseller's are no longer required to contact Skyzer Technologies to obtain
SKYLink interface License key.
Press F1 to enable or disable the SWIPE START function followed by ENTER.
NOTE: This swipe start function allows the merchant to deactivate the swipe start
from the idle screen. This feature will apply in the environment of Contactless or
Interface. For example, if the EFTPOS terminal is interfaced to a POS system, the
swipe start function can be enabled to restrict the cardholders swiping their card
before the EFTPOS terminal has received the transaction from POS system.
When the interface link or contactless is enabled on the terminal, the
swipe start function will automatically be deactivated and vice-versa.
PAGE 45 OF 132
Version 1.00
Advertisement
Table of Contents
