Ingenico iWL25 Series Operating Manual page 99

2017 paymark software
Hide thumbs Also See for iWL25 Series:
Table of Contents

Advertisement

SKYZER TECHNOLOGIES
7.0
AUTH AMT
TOP-UP AMOUNT?
8.0
PRINTING
9.0
PROCESSING NOW
10.0
SIGN RECEIPT
11.0
SIGNATURE OK? Y/N
ENTER=YES,CLR=NO
12.0
SIG ACCEPTED
13.0
SIG DECLINED
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
Key in the amount to be finalised then press ENTER. This can be greater or
$XX.XX
lesser than the authorised amount.
$0.00
PRINTING will be displayed on the terminal while printing off the receipt for the
cardholder to sign. Advise the cardholder to sign the receipt to accept the
transaction with the final amount.
PROCESSING NOW will be displayed on the terminal while processing the
transaction and will print off receipt where cardholder has to sign to accept the
transaction.
SIGN RECEIPT will be displayed on both terminal and pinpad screen. Tear the
receipt off and ask the cardholder to sign receipt.
Verify the cardholder's signature with the signature on the back of the card. If
the signature matches:
Press ENTER to accept and proceed with step 12.0
If not, press CLEAR to decline and proceed with step 13.0
SIG ACCEPTED will be displayed on both the terminal and pinpad screen. The
merchant presses ENTER to accept the cardholder's signature after verifying
signature with the card.
SIG DECLINED will be displayed on both the terminal and pinpad screen. The
merchant presses CLEAR to decline the cardholder's signature after verifying
signature with the card.
PAGE 99 OF 132
Version 1.00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iwl255Iwl252

Table of Contents