Ingenico iWL25 Series Operating Manual page 31

SKYZER TECHNOLOGIES
8.0
USE DNS Y/N
1-YES 2-NO
9.0
IP Primary
HOST DNS
direct.paymark.co.nz
10.0
IP Secondary
Host DNS
direct2.paymark.co.n
11.0
USE DNS Y/N
2-NO
12.0
IP Primary
HOST IP ADDRESS
117.120.34.110
13.0
IP Secondary
HOST IP ADDRESS
117.120.32.110
14.0
SAVE CONFIG Y/N
15.0
START TCP-IP Y/N
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark Primary DNS address. By default, it is set to
direct.paymark.co.nz. Press ENTER
This parameter specifies the Paymark Secondary DNS address. By default, it is set to
direct2.paymark.co.nz. Press ENTER
Option 2 – to allow the terminal to use Paymark IP address.
This parameter specifies the Primary Host IP Address. By default, it is set to
117.120.34.110. Press ENTER.
This parameter specifies the Secondary Host IP Address. By default, it is set to
117.120.32.110. Press ENTER.
Terminal prompts to save configuration. Press ENTER to save configuration on the
terminal or CLEAR to exit and return to idle screen.
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.
PAGE 31 OF 132
Version 1.00