Ingenico iWL25 Series Operating Manual page 27

SKYZER TECHNOLOGIES
10.0
PRIMARY
HOST PORT
33876
11.0
SECONDARY
HOST PORT
33876
12.0
USE DNS Y/N
1-YES 2-NO
13.0
GPRS Primary
HOST DNS
gprs.paymark.co.nz
14.0
GPRS Secondary
Host DNS
gprs2.paymark.co.nz
15.0
USE DNS Y/N
2-NO
16.0
GPRS Primary
HOST IP ADDRESS
117.120.35.3
17.0
GPRS Secondary
HOST IP ADDRESS
117.120.33.3
18.0
SAVE CONFIG Y/N
19.0
START GPRS Y/N
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
This parameter specifies the GPRS Primary Port Number of Paymark network. By
default the host port number is set to 33876. Press ENTER.
This parameter specifies the GPRS Secondary Port Number of Paymark network. By
default the host port number is set to 33876. Press ENTER.
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark Primary DNS address. By default, it is set to
grps.paymark.co.nz. Press ENTER
This parameter specifies the Paymark Secondary DNS address. By default, it is set
to gprs2.paymark.co.nz. Press ENTER
Option 2 – to allow the terminal to use Paymark IP address.
This parameter specifies the GPRS Primary IP address. By default, it is set to
117.120.35.3. Press ENTER.
This parameter specifies the GPRS Secondary IP Address. By default, it is set to
117.120.33.3. Press ENTER.
Terminal prompts to save configuration. Press ENTER to save configuration on the
terminal or CLEAR to exit and return to idle screen.
Terminal prompts to start GPRS link. Press ENTER to start GPRS or CLEAR to exit
without starting GPRS link to Paymark.
PAGE 27 OF 132
Version 1.00