Panasonic DVCPRO HD AJ-HDC27VP Service Manual page 591

4-30. LISTA Connection and Boot Up
TEST
ATF
POINT
TRG
M. EQ.
PC (Personal Computer) (A/D board should be installed)
TAPE
VFM3581KM or VFM3581KL (LISTA)
TOOL
VFK1481B (LISTA Software), VFK1186 (LISTA Cable)
1. Connect the LISTA cable to A/D Board in the PC.
2. Connect the clips of the LISTA cable to test point on the P.C.Board.
3. Boot Up the LISTA software on DOS mode.
♦ How to install and boot Up ♦
Copy all files on the floppy disk (VFK1481B : LISTA Software) to created directly on PC (i.e.; C:¥LISTA).
Type "LISTA" and press ENTER key, then the LISTA software VFK1481B boot up.
4. After boot up the LISTA software, <<< FORMAT SELECT >>> display appears. Select the "DVCPRO HD"
format.
5. After select the format, <<< VTR SELECT >>> display appears, and select the "AJ-HDC27VP" model.
ATF ERR L13: TP601
ATF ERR L24: TP602
R/P-HSW L13: TP113
R/P-HSW L24: TP114
Figure 4-30
MECH-24