Panasonic DVCPRO HD AJ-HDC27VP Service Manual page 22

3. Turn the JOG Dial button to move the cursor to the
desired item to be set, and press the JOG Dial
button.
The digit which value is to be set now flashes.
Example :
Press the JOG
Dial button.
< R O P >
MASTER PED
MASTER DTL
MASTER GAMMA
R GAIN
G GAIN
B GAIN
R PEDESTAL
G PEDESTAL
B PEDESTAL
4. Turn the JOG Dial button to change the setting.
5. When the desired setting is shown, press the JOG
Dial button.
The setting is now entered.
6. When other items are to be set, turn the JOG Dial
button to move the cursor, and charge and enter
the settings by repeating steps 3 through 5.
8-4.How to release the ENG SECURITY
There is a "ENG SECURITY" menu in the OPTION screen of the engineer menu.
When set this item to "ON", the engineer menu is not displayed.
When you want to release this setting, please execute the following procedure.
1. Turn the power switch to off.
2. Set the OUTPUT/AUTO KNEE switch to "BARS" mode.
3. Set the AUTO W/B BAL switch to "ABB" side and keep it, then turn the power switch to on.
4. Open the "OPTION MENU" in the CAMERA MAIN MENU 4/4.
5. Set the ENG SECURITY menu to "OFF".
: +008
: +00
: 0.45
: +000
: +000
: +000
: +000
: +000
: +000
INF-13
7. To move to the another SUB MENU, turn the JOG
Dial button to move the cursor to the title part of the
SUB MENU, and press the JOG Dial button.
The USER MENU screen or MAIN MENU screen is
now displayed, so proceed with operation by
following the same steps.
Example :
Press the JOG
Dial button.
< R O P >
MASTER PED
MASTER DTL
MASTER GAMMA
R GAIN
G GAIN
B GAIN
R PEDESTAL
G PEDESTAL
B PEDESTAL
8. Upon completion of the settings, press the MENU
button. Then the settings are now saved, exit the
settings menu mode, and return-to the normal
operation mode.
NOTE :
To exit the camera unit's menu, press the MENU
button twice. When the MENU button is pressed once,
operation is transferred to the VTR unit's menu.
: +008
: +00
: 0.45
: +000
: +000
: +000
: +000
: +000
: +000