5. When settings on the "Setup panel" is completed, click "OK(O)" button. "VSI212E Main panel" will be
opened as shown below.
6. Click "Start (S)" button on the "Main panel" window, (Click "Exit" button to quit, Click "Setup (Z) to RETURN
to Setup panel")
7. After erasing data of the Flash memory, New version-up data will be written to the Flash memory. While
processing, progress status can be confirmed by means of "Process" indicator. If the Indicator doesn't
advance for some reason, click "Emergency stop (C)" button and then confirm settings.
8. When Process bar reaches at 100% position and "Waiting to start or Completed" indicator is marked,
Version-up is completed, then click "Exit (X)" button.
9. Turn off the power of DC power supply and then set the power SW of camcorder to off. (In this situation,
Power SW should not work.)
10. Disconnect VFK1304A and then turn on the power of camcorder.
INF-36