Flash Memory Version Upgrade Method; Preparation - Panasonic DVCPRO HD AJ-HDC27VP Service Manual

16. Flash Memory Version Upgrade Method

The AJ-HDC27VP has Flash memories IC202 on CAM_SYS P.C.Board, IP100 on VTR_SYS P.C.Board and
IC100 on ERVO P.C.Board. Version upgrade procedures for each Memory is shown below.
IC 202
SW1
(Component side)
SERVO P.C.B (Component side)

16-1. Preparation

16-1-1. Equipment
Name
Flash memory version-
up tool
RS-232C Cable
Version upgrade Software
Version-up Data
Personal Computer
* MS-DOS, Windows95 and Windows98 are either registered trademarks of Microsoft corporation in the United States and/or other countries.
P2 Connector
(Solder side)
CAM_SYS P.C.B
IC 100
VFK1304 (Connection Board and Flat cable)
9pins – 9pins, Cross type, D-SUB
CAM_SYS P.C.B
VTR_SYS P.C.B
SERVO P.C.B
VVVSI File
With MS-DOS, Windows95 or Windows 98
VTR_SYS P.C.B (Component side)
Remarks
: XXXXX.BAT (come with each Version-up data)
: VFK1248E (For WINDOWS 95 or 98 type)
: VFK1503
INF-32
IP 100
P6100
Connector