Panasonic DVCPRO HD AJ-HDC27VP Service Manual page 40

7. Click "Program button" on Programmer dialog.
8. When Progress bar reaches at point of "100", the message "Programming completed" appears, then PLD
version upgrade is completed.
9. Click "OK Button" on "Programming complete" message dialog.
Progress bar
10. Turn the power of camcorder OFF and ON.
11. Confirm the current version of PLD on DIAGNOSTIC page (IC100: CAM SYS Board) and VTR DESIGN
page (IC321: VM Board). (See page of INF-10 through 16 in this service manual for how to open each menu
screen.)
®
<DIAGNOSTIC>
CAMSOFT (IN)
CAMSOFT (OUT)
GAMMA GAIN
GAMMA RAM
KNEE
PLD
DIAGNOSTIC page
* MAX+PLUS is registered trademark of Altera Corporation in the United States and/or other countries.
* Windows95 and Windows98 are either registered trademarks of Microsoft corporation in the United States and/or other countries.
Ver T1.xx-01-1.xx
Ver T1.xx-01-1.xx
Ver T1.xx-01-1.xx
Ver T1.xx-01-1.xx
Ver T1.xx-01-1.xx
Ver T1.xx-01-1.xx
INF-31
®
**** VTR DESIGN MENU****
DESIGN MENU
TEST MODE
ERROR LOG
VM PLD
VTR SYSCON
VTR DESIGN page
V x.xx
V1.8126a
00.00.00