Hydronix Hydro-Control VI Installation Manual page 5

Revision Software
No Version
1.0.0
1.1.0
1.2.0 V1.8.0
1.3.0 V1.8.0
1.4.0 V2.0.0
1.5.0 V2.0.0
1.5.1 V2.0.0
1.6.0 V2.3.0.0
1.7.0 V2.5.0.0
1.8.0 V2.8.0.0
1.8.1 V2.8.0.0
1.9.0 V2.15.0.0
Revision history
Date Description of Change
June 2010 First Release
November 2010 RS232 Command set added for Hydro-Control Iv.
March 2011 Remote support setup added
June 2011 Modification to Hydro-Control V Mix Log table
December 2011 RS232 HC06 v2 Mixlog table added, additional
sections on initial mix time and auto-track
functions for initial and pre-wet mix added
April 2013 Figure 38 added – Typical water valve set up
Pipe Diameter table added
Figure 42 updated
June 2013 USB Panel Mount socket added to Box Contents
List
Sept 2013 Added *9 and * 10 RS232 Commands
April 2014 Added Control Cabinet Information.
RS232 Command description of serial message
?14 updated.
October 2015 Added max mix log configuration, additional
features of HS0102, configuring IP to static,
weighed water resolution, calibrating sensors in
additional
controlled System shut down.
January 2016 Minor formatting update
March 2020 Reference to HC06 v2 added (no memory cards)
Archiving function added
Address Updated
Hydro-Control VI Installation Guide HD0455 Rev 1.9.0
measurement modes and PLC
5