Hydronix Hydro-Control VI Installation Manual page 39

Chapter 4
The System Parameters – Page 2
5.2
By clicking the Next button
The System Time and Date settings are used to set the clock in the Hydro-Control. This is used
to log times against the mix logs. Pressing the Edit Time and Date button
the following screen allowing the time and date to be set:
The time can be entered by selecting the hours (0 – 24) and minutes (0 – 59) boxes. The time
zone can be set using the arrows.
the following System Parameters page is accessed:
Figure 24: The second System Parameters screen
Figure 25: Changing the date and time
Hydro-Control VI Installation Guide HD0455 Rev 1.9.0
Commissioning
displays
39