Ricoh IM C2000 Series User Manual page 275

Message
"Cannot find the
specified path. Please
check the settings."
"Check original's
orientation."
When a Message Is Displayed While Using the Scanner Function
Cause
The machine or the
computer is not
connected to the
network correctly.
The computer name or
folder name specified in
the path name is
incorrect.
The firewall function is
enabled on the
computer.
The original is placed in
the wrong orientation.
Solution and reference
Check that the machine or the computer is
connected to the network correctly. For details
about your network environment, consult the
network administrator.
Register the computer name and folder name
again.
In the firewall function on the computer,
register the machine IP address and the port to
use for sending files as exceptions.
You can check the IP address in [Check Status]
"Network". For details about the ports, see
the following:
page 298 "List of Specifications"
Depending on the combination of the specified
settings, the orientation to set the original
differs. Be sure to place the original in the
correct orientation.
See "Placing an Original to Scan", User Guide
(Full Version).
273