To change the envelope weight, press [ChngThickness] to specify the weight.
5.
Check that the selected envelope size is correct, and then press [OK].
• If the selected envelope size is not the same as the actual size, select the correct envelope
size.
• When you select [Custom Size], enter the envelope size. When the envelope is set with the
flap opened, be sure to include the width of the flap.
6.
Place the original on the exposure glass.
page 206 "Envelope Orientation and Recommended Status"
7.
Press [Start].
Copying Onto Envelopes in the Paper Tray
• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is specified, press the
[Reset] key to cancel the setting.
1.
Set the envelopes in the paper tray
page 206 "Envelope Orientation and Recommended Status"
2.
Press [Copy] on the Home screen.
DZB274
Copying Onto Envelopes
83