Performance Data - ProMinent Hydro 2 Series Operating Instructions Manual

13.1

Performance data

HP2a with 50 Hz operation
Type Minimum pump capacity at maximum
back pressure
bar
100003* 100
100006* 100
100007* 100
100009* 100
100010* 100
064007 64
064015 64
064018 64
064022 64
064025 64
025019 25
025040 25
025048 25
025060 25
025068 25
Maximum
stroke rate
l/h ml/stroke Strokes/min
3 0.8 60
6 0.8 125
7 0.8 150
9 0.8 187
10 0.8 212
7 2.0 60
15 2.0 125
18 2.0 150
22 2.0 187
25 2.0 214
19 5.3 60
40 5.3 125
48 5.3 150
60 5.3 187
68 5.3 214
* Material version SST / HCT with double ball valve
Alternatively double ball valve SST with RP 3/8
** HV version for G1-DN 15
Maximum back pressure for liquid ends in material version PVT: 25 bar!
Maximum back pressure for liquid ends in material version TTT: 16 bar!
The metering capacity can deviate from the details above with HV ver‐
sions.
All figures refer to water at 20 °C.
Priming lift / priming pressure (dry) determined for empty suction line and
empty liquid end and as well as clean and moistened valves (the figures
are lower with valve springs).
The suction lift / suction pressure applies to filled suction lines and filled
liquid end - when installed correctly.
Technical data
Suction Permissible
lift priming pres‐
sure, suction
side
m water bar
column
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
3 5
Connector size
G-DN
SST: Rp 1/4"
PVT: DN10
SST: Rp 1/4"
PVT: DN10
SST: Rp 1/4"
PVT: DN10
SST: Rp 1/4"
PVT: DN10
SST: Rp 1/4"
PVT: DN10
G 3/4M - DN10
G 3/4M - DN10
G 3/4M - DN10
G 3/4M - DN10
G 3/4M - DN10
G 3/4M - DN10
**
G 3/4M - DN10
**
G 3/4M - DN10
**
G 3/4M - DN10
**
G 3/4M - DN10
**
77