Eu Declaration Of Incorporation For Machines Hp3 - ProMinent Hydro 2 Series Operating Instructions Manual

EU Declaration of Incorporation for Machines HP3

19 EU Declaration of Incorporation for Machines HP3
For pumps without explosion protection:
Tab. 20: Extract from the EU Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed com‐
plies with the provisions of the Machine Directive.
Date:
110
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the Directive, on the basis of its
functional concept and design and in the version distributed by us. Tech‐
nical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump without motor, product range Hydro 3
HP3a _ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0 _ _ _
with characteristics
§ = "0" or "1" or "3" or "4"
see nameplate on the device
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the
Machinery Directive 2006/42/EC
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
20.04.2016
You can download the Declaration of Incorporation at www.promi‐
nent.com.