Removing The Start Number Plate; Installing The Start Number Plate - KTM TC 50 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.16
11.17
54
K00663-11

Removing the start number plate

A00103-10

Installing the start number plate

A00104-10
A00105-10
–
Position the fuel tank.
–
Make sure that no cables or throttle cables are trapped or
damaged.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Position the fuel tank breather in the steering stem.
Finishing work
–
Install the left side cover. (
–
Install the right side cover. (
–
Mount the seat. ( p. 62)
–
1
Remove screw .
–
Unhook the start number plate from the brake line and
remove it.
–
Attach the start number plate to the brake line.
–
Position the start number plate.
1
Holding lugs engage in the fender.
–
Mount and tighten screw
Guideline
Screw, start number
plate
2
.
M6 10 Nm (7.4 lbf ft)
p. 59)
p. 56)
2
.
M6 4 Nm (3 lbf ft)