Raven RS1 Installation Manual page 38

C 5
HAPTER
FIGURE 16. Master Switch Installation Location
5. Locate an unused switch port of the machine's control console.
6. Use a flat-head screwdriver to gently remove the cover of the unused switch port.
7. Route the MASTER connector on the HDU switch harness cable up the right corner post of the cab and into the
control console casing.
8. Pull the MASTER connector through the switch port opening.
FIGURE 17. Master Switch Installed
9. Install the master switch (P/N 063-0173-961) on the MASTER connector of the HDU switch harness cable (P/N
115-4010-028).
10. Feed the harness and switch wires back into the console casing.
11. Press on the switch casing to ensure the switch is securely installed.
34
Case IH Patriot 4440, Model Year 2013-2016 Raven RS1™ HDU Guidance and Steering Installation Manual