Raven RS1 Installation Manual page 28

C 4
HAPTER
FIGURE 6. WAS Installed
16. Tighten the M10 universal ball mounts and M10 jam nuts to each other on the WAS assembly to ensure they are
installed securely.
17. Install the WAS adapter cable (P/N 115-4010-032) on the base-end of the WAS.
FIGURE 7. Machine's AUTO Yaw Connection
18. Disconnect the machine's existing X-716 connector located near the AutoSense Sensor and plug in the mating
connector on the WAS adapter cable.
24
Case IH Patriot 4440, Model Year 2013-2016 Raven RS1™ HDU Guidance and Steering Installation Manual