C
5
HAPTER
FIGURE 12. Viper 4 Cable Connection
10. Connect the round 7-pin connector to the back of the Viper 4 field computer.
INSTALL THE CAN BRIDGE CABLE - IF APPLICABLE
FIGURE 13. CAN Bridge Cable Connected to HDU Harness Cable
1. Remove the terminator from the 4-pin connector next to the Viper 4 connection of the HDU harness cable
(P/N 115-4010-026).
2. Install one end of the CAN bridge cable (P/N 107-0172-458) on the 4-pin connector.
3. Connect the other end of the CAN bridge cable to the mating connector of the Hawkeye™ harness cable.
32
Case IH Patriot 4440, Model Year 2013-2016 Raven RS1™ HDU Guidance and Steering Installation Manual