Chapter 5 Cab Component Installation; Install The Rs1 Unit - Raven RS1 Installation Manual

Case ih patriot 4440 model year 2013-2016 hdu guidance and steering installation manual

Hide thumbs Also See for RS1:

Table of Contents

CHAPTER

FIGURE 1. Mounting Bracket Installed

1. Install the RS1 mounting bracket (P/N 107-0172-498) on the bottom of the RS1 unit using four 1/4"-20 x 1/2" flat

head machine screws (P/N 311-0003-041).

FIGURE 2. Machine's Existing Receiver Mounting Bracket

2. Install the RS1 mounting bracket (P/N 107-0172-498) on the front of the cab roof using the machine's existing

hardware.

NOTE:

The RS1 mounting bracket should be installed so that the latch is on the left side.

P/N 016-5032-104 Rev. B

C AB COMPONENT

C H A P T E R 5

INSTALLATION

Table of Contents