Table of Contents
Advertisement
Installation and Operation
•
Adjust the thickness gauge. Start the blade by turning the switch or by pressing on the white or green
button;
•
Grip the handle of the product grip and start the forward and backward slicing movement. The product
travels towards the gauge plate by pushing towards the blade;
•
When finished, return the thickness control knob to '0' and draw the carriage back.;
•
Stop the blade by turning the switch or by pressing the red or black button.
Maintenance
CLEANING THE SLICER
GENERAL
The machine must always be accurately cleaned at least once a day, and more often if necessary. Always wear
protective gloves.
DISASSEMBLING THE MACHINE FOR CLEANING
•
Disconnect the plug from the mains;
•
Turn the gauge plate knob to '0';
12
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-IT-0300-V, MS-0330-V,MS-0350-V, MS-0370-V and is the answer not in the manual?