Table of Contents
Advertisement
Maintenance
Loosen the knob (1), lift and rotate the sharpener by 180° (2) and insert the wheels on the slicer blade.
Tighten the knob;
Operate the Blade by using the switch (3), keep the small button (4) pushed; Allow the blade to rotate for about
30 to 40 seconds then use the switch (5) to stop it.
Brush a pencil lightly on the external side of the blade to check for a slight spud; We advise performing this
operation with the utmost care, as the blade is extremely sharp.
18
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-IT-0300-V, MS-0330-V,MS-0350-V, MS-0370-V and is the answer not in the manual?