Technical Specifications - Omcan MS-IT-0300-V, MS-0330-V,MS-0350-V, MS-0370-V Instruction Manual

Safety and Warranty
• Open the box and remove your copy of the manual of use and maintenance, then proceed according to the
instructions found on that manual;
• Lift the machine still wrapped in a transparent polyethylene sheet and extract it from the box;
• Now check the box content and make sure it corresponds to what shown on the external label.
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

The machine is essentially made of a base supporting a circular blade mounted in a vertical position. This
blade is driven by an electrical motor to slice foodstuffs. The machine is equipped with a carriage holding a
product tray and sliding on a bar mounted under the base top, parallel to the blade. Slice thickness is adjusted
by means of a gauge plate mounted in front of the blade. This plate, against which rests the product to be
sliced is moved transversely with respect to the blade by a value corresponding to the desired slice thickness.
The product is fed to the machine towards the gauge plate. All the machine components are made of polished
and anodically oxidized aluminium alloy, of stainless steel and food grade plastic material. The blade is driven
by an electrical motor, transmission is by means of a longitudinally grooved belt. The machine is started and
stopped by a control button or switch. These models have a built-in blade sharpener.
MECHANICAL AND ELECTRICAL SAFETY DEVICES
The following mechanical safety devices were installed:
• A series of aluminium and transparent plastic guards on the product carriage.
1 YEAR PARTS AND LABOR BENCH WARRANTY
6