The Rear Panel Of The Booklet Maker - Canon Oce BLM550+ Operation Manual

The Rear Panel of the Booklet maker

The Rear Panel of the Booklet maker
Illustration
[4] The Rear Panel of the Booklet maker
Component - function table
The Rear Panel of the Booklet maker
A
B
C
D
E
14 Chapter 2 - Introduction to the Booklet maker
Component
Rating and serial label
Power ON/OFF switch
Fuses
Voltage label
Power input connector
A
B
C
D
E
Function
The rating label displays the type of machine, serial num-
ber, power use, and fuse information.
The mains power ON/OFF switch turns the Booklet maker
ON or OFF. When you turn OFF the Booklet maker, the cur-
rent settings are stored.
The fuses make sure the operator and the machine are pro-
tected if there is an electrical problem or short circuit.
The voltage label is fitted to the Booklet maker during the
installation procedure. The voltage label displays the selec-
ted voltage.
The power input connector is used to connect the Booklet
maker to the electrical power supply.