Table of Contents
Advertisement
Book Quality
¦
¦
V
Call your service engineer.
Trimming problem - the book is not trimmed square
Open the trim stop guard and check for paper trimmings (see
page
129).
Is the trim stop clear of paper trimmings?
Yes
¦
¦
¦
¦
¦
¦
V
Call your service engineer.
Trimming problem - poor trim quality
The trim process uses a double-edge blade to cut thick books. This can leave a small mark in the
center of the trimmed edge. The visibility of this mark will depend on the paper quality and
characteristics.
[26] Blade witness mark in the center of the book
[27] Blade damage mark
Are there marks on the trimmed edge other than the blade witness mark?
72
Chapter 6 - Error Conditions, Problems and Solutions
No further action is required.
No
Clear paper from the trim stop.
Does the problem persist?
Yes
¦
¦
V
Clear paper from the trim stop on
No
No further action is needed.
4
Advertisement
Table of Contents
