Table of Contents
Advertisement
Clean the Trimmings Removal Fingers
[49] Trimmer infeed conveyor viewed from above 2
A
B
C
Step
1
2
3
4
5
6
7
116
Chapter 7 - Maintenance
Trimmer infeed conveyor
Trimmings removal fingers
Former clamp mechanism
Action
Lift the Booklet maker main deck.
Remove the trim bin.
Clean the four visible trimmings-re-
moval fingers with an alcohol wipe.
Rotate the conveyor shaft by half a
turn.
Clean the four visible trimmings-re-
moval fingers with an alcohol wipe.
Fit the trim bin.
Close the Booklet maker.
A
B
C
Information
Lift the Booklet maker Main Deck on
See
page
49.
The procedure can be seen from the top
of the machine.
Access to the parts is through the former-
clamp mechanism (see illustration 'Trim-
mer infeed conveyor viewed from above
1').
Wear protective gloves when you use the
alcohol wipe.
1. Hold the shaft and push to the right,
against spring pressure to disengage the
shaft from the drive pin.
3
2. Rotate the shaft by half a turn.
3. Align the shaft with the drive pin and
release.
Wear protective gloves when you use the
alcohol wipe.
1
2
Advertisement
Table of Contents
