Fit A New Stitch-Wire Spool - Canon Oce BLM550+ Operation Manual

Fit a New Stitch-wire Spool

Step
1
2
3
4
5
6
7
8
Action
Open the stitch-wire cabinet
Remove the stitch-wire cap and fin-
ished stitch-wire spool.
Fit a new stitch-wire spool.
Fit the stitch-wire cap
Loosen the end of the stitch-wire
from the edge of the stitch-wire
spool.
Use wire-cutters to remove the
damaged end of the stitch-wire.
Feed the stitch-wire through the
stitch-wire guide.
Install the stitch-wire.
Information
Remove enough stitch-wire to leave the end
of the stitch-wire clean and straight.
Install the Stitch Wire into the Stitch Head on
page 126
Chapter 7 - Maintenance
Fit a New Stitch-wire Spool
125