Lubricate The Stitch Head - Canon Oce BLM550+ Operation Manual

Lubricate the Stitch Head

Lubricate the Stitch Head
Introduction
Lubricate the stitch head:
• Every month, as part of the operator maintenance plan.
• When a new stitch-wire is installed if this interval is shorter.
Required tools
Klüber Isoflex NBU15 Grease, 50g
Air duster
IMPORTANT
Only use the grease shown in this manual. Correct lubrication extends the performance and
service life of the stitch head. Other types of grease do not protect the stitch head.
IMPORTANT
Only apply the grease as shown. If you apply additional grease, the paper will become stained.
Step
1
2
3
4
118 Chapter 7 - Maintenance
Action
Trim the first 2.5 mm from the noz-
zle.
Remove the cap from the tube of
grease.
Fit the nozzle to the tube of grease.
On the user interface, touch
VANCED > STITCHER UP > STITCH‐
ER UP
Information
[51] Tip of the nozzle
[52] Trim the nozzle of the tube of grease
AD‐
The folder cover must be closed.
This action moves the stitch head to
the correct position for lubrication.
4