The Load & Save Window - Canon Oce BLM550+ Operation Manual

The LOAD & SAVE Window
Introduction
The LOAD & SAVE
The jobs are displayed in a list on the screen. Touch the job name or use the Up arrow or Down
arrow to make the selection.
Button overview
The LOAD & SAVE Window Buttons
Button
SAVE
- REPLACE
- CANCEL
- SAVE NEW
JOB DETAILS
LOAD
PADLOCK SYMBOL
DELETE
VIEW OF JOB LIST
- A->Z
window lets you save and reload job settings. Each job is given a name.
Information
Touch SAVE to save the current settings. An on-screen keyboard
is displayed. Enter the job name. Touch OK or CLOSE. The new
job appears in the list of saved jobs. You can reload a saved job to
decrease set-up time in the future.
If you change the settings of a saved job, touch REPLACE to save
the new settings.
Touch CANCEL if you do not need to save a job that you have
changed.
If you change the settings of a saved job, touch SAVE NEW to
save the new settings as a new job. An on-screen keyboard is dis-
played. Enter the new job name. Touch OK or CLOSE. The original
job is not changed. If the job name is not changed before OK or
CLOSE is touched, the job will be saved with the current name fol-
lowed by an asterisk *.
JOB DETAILS shows the settings for each saved job. Select the job
that you need to view from the job list. Touch JOB DETAILS to see
a summary of the job settings.
Touch the job name or use the Up arrow or the Down arrow to
make the selection. Touch the LOAD button
The padlock symbol shows when a saved job is locked or un-
locked. There is a small padlock symbol next to each locked job.
To lock or unlock a job.
1. select the job from the job list
2. touch the large key symbol.
A padlock symbol displayed in light grey shows that a job has
been locked by a supervisor to prevent changes to the settings
To delete a particular job it must be unlocked. Touch the job name
or use the Up arrow or Down arrow to make the selection from the
job list. Touch and hold DELETE. A red line appears. The red line
fills from left to right. Hold DELETE until the red line reaches the
right-hand side.
VIEW OF JOB LIST changes the order that saved jobs are listed.
There is a line between Factory Template jobs and jobs saved by
the operator. The Factory Template jobs are at the top of the list
Touch A->Z to list the jobs in alphabetical order.
The LOAD & SAVE Window
Chapter 4 - The User Interface
4
35