Run The Job - Canon Oce BLM550+ Operation Manual

Run the job

Procedure
1.
Make sure the adjustments on the Booklet maker are complete before you release the print job
from the print queue.
2. Start the print job. The Booklet maker starts automatically.
3. Check the quality of the first book.
4.
If the quality is not acceptable, make adjustments (see
Result
During the job
• Unload books from the Stacker before the Stacker is full. The Booklet maker displays no
message when the Stacker is full.
• Unload books from the optional Book Stacker (see
Booklet maker displays a message when the Stacker is full. The Booklet maker stops.
• Empty the trim bin from time to time. The Booklet maker displays a message when the trim bin
is full Empty the Trim Bin on page
Book Quality on page
Unload the Book Stacker on page
51.
Chapter 3 - How to run the Booklet maker
Run the job
64).
57). The
25