Clear A Stitch Head Jam; Procedure 1 - Canon Oce BLM550+ Operation Manual

Clear a Stitch Head Jam

Introduction
The error message JAM IN STITCH HEAD is displayed.
This may be caused by
• the SET THICKNESS setting is incorrect
• the stitch head is jammed by broken wire
• the stitch head needs lubrication
Do Procedure 1. If the error message continues, do Procedure 2.

Procedure 1

Step
1
2
3
4
5
6
7
Action
Open the folder cover.
Lift the clincher frame.
Remove the jammed paper.
Check for broken or damaged stitch-
es in the clincher area. Manually op-
erate the clincher to clear any stitch-
es that are jammed.
Lower the clincher frame.
Close the folder cover.
Press the START button . Follow
the on-screen instructions.
Information
Open and Close the Folder Cover on
See
page 45
Lift and Lower the Clincher Frame
See
on page 46.
A
A: Press to manually operate the clinch-
er.
Lift and Lower the Clincher Frame
See
on page 46
Chapter 6 - Error Conditions, Problems and Solutions
Clear a Stitch Head Jam
97