Table of Contents
Advertisement
Error Messages
Problem
TOUCH PAD ERROR
Touch START to clear ma-
chine
Trim axis moving
TRIM BIN OPEN
TRIM BLADE NOT PARKED
TRIM - No comms
USER STOP
84
Chapter 6 - Error Conditions, Problems and Solutions
Cause
There is a fault with the
START and STOP touch pads.
If the problem continues, then
call your service engineer.
There may be some paper in
the machine. Touch START
to clear the machine before
you start a new job.
The trim axis (size adjustment)
is moving. This message
clears when the adjustment is
complete.
If the message does not clear,
touch ADVANCED > RE REF.
The trim bin is not fitted or is
not contacting the safety
switch. Fit the trim bin.
The trim blade is in the wrong
position. Touch START
reset the position.
Follow the instructions on the
screen.
Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
The user has touched the
STOP
button while the ma-
chine is in operation. Touch
START
to restart the ma-
chine.
Solution
to
Advertisement
Table of Contents
