Canon Oce BLM550+ Operation Manual page 65

¦
¦
¦
¦
V
Have you entered the measured PAPER SIZE into the touchscreen?
Yes
¦
¦
¦
V
Have you accurately measured the set thickness or the sheet thickness?
Yes
¦
¦
¦
V
Have you entered the measured set thickness or sheet thickness into the touch screen?
Yes
¦
¦
V
Touch ADVANCED > RE-REF > RE-REF to re-reference the machine.
Does the problem persist?
Yes
¦
¦
V
Is the paper thin and/or curly?
Yes
¦
¦
V
Increase the TAMPER TIME to give the paper more time to settle. Supervisor access level is nee-
The MENU Window on page
ded (see
Press CONFIGURE > SHUTTLE. Increase the TAMPER TIME in increments of 200.
Does the problem persist?
Yes
¦
¦
V
Call your service engineer.
Print a sample to the stacker and measure the printed paper.
Accurate measurement will improve book quality.
No
Enter the correct, measured PAPER SIZE into the touchscreen.
No
Measure the set thickness or the sheet thickness and enter the
correct SET THICKNESS or SHEET THICKNESS into the touch
screen.
No
Enter the correct SET THICKNESS or SHEET THICKNESS into
the touch screen.
No
No further action is required.
No
Call your service engineer.
39). This may reduce the production speed for thin books.
No
No further action is required.
Chapter 6 - Error Conditions, Problems and Solutions
Book Quality
65