Canon Oce BLM550+ Operation Manual page 67

Table of Contents

Call your service engineer.

Adjust the NUMBER of forms setting. Increase the NUMBER of forms to

create more spine form and decrease the NUMBER of forms to create

less spine form.

Does the problem persist?

Yes

Load a Default Job. This will reset the FORM settings, including PRES‐

SURE, NUMBER and THRESHOLD (see

fault settings on page

Does the problem persist?

Yes

Run a standard job using paper of 80 g/m² (20 lb bond).

Does the problem persist?

Yes

Re-reference the machine. Touch ADVANCED > RE-REF > RE-REF to re-

reference the machine.

Does the problem persist?

Yes

Chapter 6 - Error Conditions, Problems and Solutions

No further action is required.

Reset the Booklet maker to de-

42).

No further action is required.

The problem is caused by the cover material or

the finish on the cover. Change the cover ma-

terial.

No further action is required.

Book Quality

Table of Contents