Apply Grease To The Driver Bar - Canon Oce BLM550+ Operation Manual

Apply Grease to the Driver Bar

Apply Grease to the Driver Bar
Step
1
2
120 Chapter 7 - Maintenance
Action
Apply a thin line of grease from the
tube (20 mm long and maximum
0.5 mm thick) to the visible surface
of the driver bar.
NOTE
Make sure that you apply
the grease in an upward
direction, from the bot-
tom of the driver bar.
NOTE
Only apply the grease as
shown. If you apply addi-
tional grease, the paper
will become stained.
Fit the wire holder.
Information
1.2"
[53] Maximum dimensions of the line of grease
[54] Driver bar
A = Driver
B = Apply grease here
C = Driver bar
[55] Apply the grease to the driver bar
A = Start
B = Stop