Connecting The Interface; Position Of The Connection - JUMO LOGOSCREEN nt Interface Description

3.1 Position of the connection

Front panel
of the
paperless
recorder
Connection
diagram

3 Connecting the interface

Use either the setup interface on the front panel or the setup
interface on the back!
The connection on the front panel can only be made through the
setup interface with the connecting cable for "PC interface with
TTL/RS232 converter and adapter", Part No. 70/00350260.
If the PC or notebook does not have a serial interface, then the
connecting cable "PC interface with USB/RS232 converter and
adapter", is also required (Part No. 70/00456352).
The transmission parameters for the interface are fixed in the
instrument, and cannot be altered.
- baud rate = 9600 bps
- data format = 8 data bits, 1 stop bit, no parity
Setup interface
9