Switches; Ecs Power Switch - HP Performance Optimized Datacenter 20c Maintenance And Service Manual

Switches

ECS power switch

The ECS power switch is located on the ECS cabinet door.
You need a screwdriver to remove and replace the ECS power switch.
Removing the ECS power switch
Remove the ECS power switch (1).
1.
Remove the four screws from the door interlock plate (2).
2.
Remove the switch body from the interlock plate (3).
3.
Disconnect the wires.
4.
Replacing the ECS power switch
Reconnect the wires.
1.
Insert the switch body into the interlock plate (1).
2.
Insert the four screws into the door interlock plate (2).
3.
Removal and replacement procedures 67