Exterior Lights; Headlight Switch - Jeep GRAND CHEROKEE WK 2022 Owner's Manual

44 GETTING TO KNOW YOUR VEHICLE

EXTERIOR LIGHTS

H S
EADLIGHT WITCH
The headlight switch is located on the left side of
the instrument panel, next to the steering wheel.
The headlight switch controls the operation of the
headlights, parking lights, instrument panel lights,
cargo lights, and fog lights (if equipped).

Headlight Switch

1 — Rotate Headlight Switch
2 — Push Front Fog Light
3 — Instrument Panel Dimmer Control
Headlight Switch (Vehicles Sold In Canada)
1 — Rotate Headlight Switch
2 — Push Front Fog Light
3 — Instrument Panel Dimmer Control
NOTE:
Vehicles sold in Canada are equipped with a head-
light switch with an AUTO and ON detent but
without an OFF detent. Headlights will be deacti-
vated when the headlight switch is placed in the
parking lights position. However, the Daytime
Running Lights (DRLs) will be activated along with
the front and rear marker lights. The DRLs may be
deactivated when the parking brake is engaged.
To turn on the headlights, rotate the headlight
switch clockwise. When the headlight switch is on,
the parking lights, taillights, license plate light and
instrument panel lights are also turned on. To turn
off the headlights, rotate the headlight switch back
to the O (off) position.
NOTE:
For vehicles sold in Canada, rotate the headlight
switch clockwise from the AUTO position to the first
detent to turn on parking lights and instrument
panel lights. Rotate the headlight switch to the
second detent to turn on headlights, parking lights,
and instrument panel lights.
NOTE:
Your vehicle is equipped with plastic headlight

and fog light (if equipped) lenses that are lighter
and less susceptible to stone breakage than
glass lights. Plastic is not as scratch resistant as
glass and therefore different lens cleaning
procedures must be followed.
To minimize the possibility of scratching the

lenses and reducing light output, avoid wiping
with a dry cloth. To remove road dirt, wash with
a mild soap solution followed by rinsing.
CAUTION!
Do not use abrasive cleaning components,
solvents, steel wool or other abrasive materials
to clean the lenses.