Table of Contents
Advertisement
178 Storage space and interior equipment ›
Fasten the raised variable loading floor in the up-
per position
NOTICE
Before closing the boot lid, remove the hook from
the frame.
Removing and inserting
›
Lift the variable loading floor up to a distance of
about 15 cm below the boot cover and then re-
move it.
›
Insertion takes place in reverse order.
Partition in the boot
Removing and inserting
Removing and inserting the partition
The partition prevents the cargo from slipping.
The maximum load for the partition is 10 kg.
Partition in the boot
›
Raise the rear part of
the variable loading
floor.
›
Fasten the raised varia-
ble loading floor to the
frame of the luggage
compartment lid using
the hook.
›
To remove, pull the se-
curing tabs upwards
and outwards and re-
move the partition.
Remove fastening element and insert
The fastening element prevents the cargo from slip-
ping.
The fastening element is attached to the partition on
the variable loading floor.
The maximum load for the fastening element is
10 kg.
Move the fastening element
Partition with fastening element in the
luggage compartment
›
To insert engage the
partition in the fixing
points
or
.
A
B
›
To insert, position the
fastening element in an
oblique direction on
the partition and press
downwards.
›
Removing takes place
in reverse order.
Unlocking
1
Moving
2
Applying
3
The maximum load for
the partition is 10 kg.
The maximum load for
the fastening element is
10 kg.
Advertisement
Table of Contents
