Table of Contents
Advertisement
Cruise control system
Functionality
The cruise control system (GRA) maintains the set
speed without having to press the accelerator pedal.
This, however, is only possible to the extent permit-
ted by the engine output and braking power of the
vehicle.
WARNING
Risk of the cruise control system starting uninten-
tionally!
Deactivate cruise control after use.
▶
Status display in the instrument cluster display
illuminated - the cruise control system is acti-
vated
illuminated - cruise control is active
When cruise control starts, the set speed is
displayed.
Operating conditions
✓ The driving speed is higher than 20 km/h.
Operation
A
Activate GRA (cruise control inactive)
Disable GRA
Interrupt control (sprung position)
B
Resume cruise control
C
Start control at the current speed / reduce
speed
D
Show menu of assistance systems - Possibility
to switch between GRA and speed limiter
Accelerate temporarily
›
Depress the accelerator pedal.
Releasing the accelerator pedal will cause the speed
to drop again to the set speed.
If no speed is set, the current speed is adopted.
1)
Interrupt speed control
▶
▶
Troubleshooting
Cruise control system faulty
Adaptive Cruise Control (ACC)
Functionality
Control
ACC maintains the set speed. When your vehicle ap-
proaches the vehicle in front, ACC will automatically
start to maintain the set distance to this vehicle.
Maintaining the set speed and the distance will here-
inafter be referred to as Control.
ACC does not respond to stationary objects or to
crossing or oncoming objects.
Speed range
Depending on the equipment, ACC allows a speed
setting in the range of 30-210 km/h.
If control is started at a speed of less than 30 km/h
on vehicles with an automatic transmission, the
speed is automatically increased to 30 km/h or con-
trolled according to the speed of the vehicle ahead.
Distance level
The distance to the vehicle ahead can be adjusted to
five different levels.
▶
Automatic stopping and starting with manual
1)
/ Increase speed
transmission
A vehicle with a manual gearbox can be decelerated
to a stop using the ACC and it can start moving
again.
›
Or:
›
Control is disconnected in case of longer holding pe-
riods.
To resume control:
Driver assist systems ›
Cruise control system
After pressing the brake pedal.
After an ESC intervention.
illuminates
›
Get the help of a specialist company.
WARNING
ACC is intended primarily for use on motorways.
WARNING
Maintain a minimum distance in accordance with
the country-specific legal regulations.
When stopping, move the shift lever to the right,
to the neutral position.
Depress the clutch pedal.
135
Advertisement
Table of Contents
