Table of Contents
Advertisement
130 Starting and driving ›
Manual switching on
Automatic switching on, after switching off the ig-
nition
For vehicles with manual transmission, the parking
brake is automatically switched on after switching
off the ignition.
The function is activated or deactivated as follows in
the Infotainment system.
›
Tap the outside .
›
By moving your finger sideways, choose the screen
with the menu item Brakes .
›
Select menu item Brakes and activate or deactivate
the function.
NOTICE
Risk of vehicle damage!
Switch off the parking brake in situations when
▶
rolling the vehicle is required.
Automatic shutdown
The parking brake switches off automatically when
starting up.
If there is an automatic shutdown e.g. to prevent
starting on a slope, keep pulling the button
Automatic shutdown conditions
✓ Driver's door is closed, in some cases, the driver's
seat belt is also fastened.
Manual shutdown
Troubleshooting
Parking brake error
illuminates
Message regarding a parking brake error
Auto Hold automatic holding function
›
Pull on the button
and hold it.
The following symbols
light up.
in the button.
▶
in the instrument
▶
cluster.
.
›
With the ignition
switched on, press the
brake pedal and at the
same time push the
button.
.
›
Seek the help of a specialist garage.
Parking on a steep slope
flashes
Notification regarding parking position on a steep
slope
›
Go to another parking spot where there is less of a
slope.
Noise when using the parking brake
Noise when using the parking brake is normal. This is
not a defect.
The vehicle battery is discharged, the parking
brake cannot be switched off
›
Connect the vehicle battery to a power source,
such as the battery of another vehicle.
Emergency braking when the brake system is
faulty
Turn on
Turn off
›
Let go of
the button.
Or:
›
Depress the accelerator pedal.
Auto Hold automatic holding function
Usage
Auto Hold automatically secures the vehicle from
rolling away when stopped.
Functionality
WARNING
Risk of accident!
Auto Hold is not able to stop the vehicle under all cir-
cumstances, such as on slippery ground, or on gradi-
ents.
›
Pull on the button
and hold it.
The vehicle starts to
brake strongly and an
audible signal is emit-
ted.
Advertisement
Table of Contents
