Table of Contents
Advertisement
144 Park Assist systems ›
Or:
›
Press
the button.
Automatic switch-on during forward travel
When approaching an obstacle at a speed of less
than 10 km/h.
Automatic switch-on does not activate automatic
braking.
Turn off
›
Disengage reverse gear.
Or:
›
Press
the button.
Automatic switch off
The driving speed is higher than 15 km/h.
Function restriction
The system might not warn of an obstacle e.g. in the
following cases, or a warning may only be issued in-
correctly.
Unfavourable weather conditions.
▶
The detected obstacles are moving.
▶
Sensor signals are not reflected by the surface of
▶
the obstacles.
It is a small obstacle, e.g. a stone or a pillar.
▶
Settings
To display the system settings menu, do the follow-
ing.
›
Press
the button under the Infotainment
tap on the Infotainment screen.
Or:
›
Press
the button under the Infotainment
tap on the Infotainment screen.
Troubleshooting
After switching on, an audible signal sounds for 3
seconds and there is no obstacle near the vehicle
›
Get the help of a specialist company.
After switching on, not all scanned areas are dis-
played on the Infotainment screen
›
Move the vehicle forward or backward a few me-
ters.
›
If the scanned areas are still not displayed, obtain
the help of a specialist garage.
Rear view camera
Rear view camera
Functionality
When reversing, the area behind the vehicle is dis-
played in the Infotainment screen complete with ori-
entation lines.
The camera is equipped with a cleaning system.
Cleaning takes place automatically together with the
washing of the rear window or with the aid of the
functional surface
in the Infotainment screen.
Orientation lines and functional surfaces
Orientation lines
Distance about 40 cm
A
Distance about 100 cm
B
Distance about 200 cm
C
The lines indicate the track, which is controlled
D
at the current steering angle. The distance be-
tween the side lines corresponds approximately
to the vehicle width including mirrors.
Function surfaces
Mode for transverse parking
A
Mode for driving up to a trailer
B
Mode for monitoring the area behind the vehicle
C
(wide view)
Switching audible parking signals on/off
D
Setting the parking aid
E
Brightness, contrast and colour settings of the
F
image display
Functional surface for cleaning the rear view
camera
Advertisement
Table of Contents
