Table of Contents
Advertisement
Fasten the raised variable loading floor in the up-
per position
NOTICE
Before closing the boot lid, remove the hook from
the frame.
Removing and inserting
›
Lift the variable loading floor up to a distance of
about 15 cm below the luggage compartment cov-
er and then remove it.
›
Insertion takes place in reverse order.
Storage space and interior equipment ›
›
To set in the upper po-
sition, position the vari-
able loading floor in the
front area on area
.
A
›
To set in the lower po-
sition, position the vari-
able loading floor in the
front area on space
.
B
›
Press the variable load-
ing floor forward and
hang up.
›
Lift the rear section of
the variable loading
floor.
›
Secure the raised vari-
able loading floor to
the frame of the boot
lid with the hook.
Partition in the boot
Removing and inserting
Removing and inserting the partition
The partition prevents the cargo from slipping.
The maximum load for the partition is 10 kg.
Remove fastening element and insert
The fastening element prevents the cargo from slip-
ping.
The fastening element is attached to the partition on
the variable loading floor.
The maximum load for the fastening element is
10 kg.
Move the fastening element
Partition in the boot
151
›
To remove, pull the se-
curing tabs upwards
and outwards and re-
move the partition.
›
To insert engage the
partition in the fixing
points
or
.
A
B
›
To insert, position the
fastening element in an
oblique direction on
the partition and press
downwards.
›
Removing takes place
in reverse order.
Unlocking
1
Moving
2
Applying
3
Advertisement
Table of Contents
