Traffic Sign Recognition - Skoda Octavia 2020 Owner's Manual

Hide thumbs Also See for Octavia 2020:
Table of Contents

Advertisement

140 Driver assist systems ›
Your vehicle will be overtaken by vehicle
er the vehicle
approaches, the earlier the warning
A
light comes on.
Vehicle
is overtaken by your vehicle at a speed
B
that is faster by max. 10 km/h. If the speed is higher
during the overtaking process, no warning will be
provided by the indicator light.
Indicator light
illuminates - there is another vehicle behind your
vehicle
flashes - there is another vehicle behind your ve-
hicle, and the turn signal on the same side is switch-
ed on
For vehicles with Lane Assist The indicator light
flashes even if your vehicle crosses the boundary line
in the direction of the approaching vehicle. The sys-
tem will trigger a steering wheel vibration in this
case.
For this, Lane Assist must be activated and the boun-
dary line between the vehicles recognized.
Operating conditions
✓ The driving speed is higher than 15 km/h.
✓ No accessories are connected to the trailer sock-
et.
Function restriction
The system cannot detect lane width. For this rea-
son, it may, for example, draw attention to a vehicle
in a distant lane in the following cases.
Driving on a road with narrow lanes or on the lane
edge.
Driving round bends.
The system can draw attention to objects along the
road, such as high guard rails or noise barriers.
In the following cases, the system does not have to
issue a warning of another vehicle, or the warning
may be issued incorrectly.
Unfavourable weather conditions.
A very fast approaching vehicle.
When going round a sharp bend or a roundabout.
Settings
In the instrument cluster display
The system settings are made in the display of the
instrument cluster in menu item Assistants.
In Infotainment
The system settings are made in the infotainment
system in the following menu.

Traffic sign recognition

The fast-
A.
Troubleshooting
Message regarding system unavailability
Stop the engine and start again.
If the system is still not available, seek the help of a
specialist garage.
Traffic sign recognition
Usage
The road sign recognition shows road signs in the
display of the instrument cluster. This also indicates
exceeding the speed limit.
Functionality
Displayed traffic signs
Speed limits.
No overtaking.
Driving bans - one-way traffic.
Danger sign.
Additional characters, e.g. speed limit in wet condi-
tions.
WARNING
Road signs on the road always have priority over the
road signs shown on the display.
Driving with a trailer
If a trailer or other accessories are connected to the
trailer socket, trailer-relevant traffic signs are also
displayed.
Driving on roads with no speed limits
If you are on a road without speed limits, the traffic
sign will appear on the display
Example of road sign display
Example of additional characters
Example of several traffic signs recog-
nized at the same time.
Speed units
The speed information in the displayed traffic signs
refer to the country-specific speed units.
For example, the displays
mph, depending on the country.
refer to 30 km / h or 30

Advertisement

Table of Contents
loading

Table of Contents