Table of Contents
Advertisement
134 Driver assist systems ›
When the control starts,
set limit is displayed.
illuminates - cruise control is active
flashing - the set limit is exceeded
Operating conditions
✓ The driving speed is higher than 30 km/h.
Operation
Variant without GRA
A
Activate limiter (control inactive)
Deactivate limiter
Interrupt control (sprung position)
B
Resume control
1)
C
Start control at the current speed / reduce
limit
Variant with cruise control
A
Activate GRA (condition for the subsequent
activation of the limiter)
To activate the speed limiter, press the
ton and the menu item Speed limit in the instrument
cluster.
Deactivate limiter
Interrupt control (sprung position)
1)
B
Resume control
If no speed limit is set, the current speed is set as the speed limit.
1)
Speed limiter
is highlighted and the
/ Increase limit
but-
D
/ Increase limit
C
Start control at the current speed / reduce
limit
D
Show menu of assistance systems - Possibility
to switch between GRA and speed limiter
Switching to cruise control interrupts the con-
trol.
Adjust the speed limit using the
Press for increments of 1 km/h.
Hold for increments of 10 km/h.
Variant with ACC
Activate ACC (condition for the subsequent
activation of the limiter). To activate the limit-
er, press the button
steering wheel and the menu item in the in-
strument cluster Speed limit in the instrument
cluster.
Resume control
1)
/ Increase limit in incre-
ments of 1 km / h (sprung position)
Interrupt control (sprung position)
Deactivate limiter
Increase limit in steps of 10 km/h
Decrease limit in steps of 10 km/h
Start control/Reduce limit in steps of 1 km/h
Exceeding the limit
›
Disengage the accelerator pedal completely.
Control will continue as soon as the vehicle has de-
celerated to below the set limit.
Troubleshooting
Speed limiter faulty
illuminates
›
Get the help of a specialist company.
and
keys
B
C
on the multifunction
Advertisement
Table of Contents
