Interrupting cruise control
After pressing the brake pedal.
▶
By operating the clutch pedal for a long time.
▶
After an ESC intervention.
▶
After deactivation of the ASR.
▶
Resuming control
›
If a speed is stored, move the lever to the sprung
position
.
The vehicle is controlled at the set speed. The set
speed is shown in the instrument cluster display.
Function restriction
WARNING
Be particularly attentive and alert in the following
▶
situations.
Regulation according to the vehicle in the adjacent
lane
If your vehicle is moving faster than the vehicle in
the next lane on the driver's side, at a speed of more
than 80 km/h, this may cause your vehicle to be con-
trolled according to that vehicle.
When cornering
When cornering, a vehicle in the next lane may enter
the detected area. Your vehicle will be controlled ac-
cording to this vehicle.
Narrow or staggered vehicle
ACC detects a narrow or staggered vehicle only
when it is in the area covered by the radar.
Driver assist systems ›
Adaptive Cruise Control (ACC)
Lane change by another vehicle
A vehicle that changes to the lane a short distance
away may not be recognized by the ACC in time.
Stationary vehicle
If a vehicle in front turns and there is a stationary ve-
hicle in front of this vehicle, the ACC will not respond
to the stationary vehicle.
Vehicles with special load or special bodies
A load or superstructure that protrudes outside the
vehicle might not be detected by the ACC.
Settings
In Infotainment, in the following menu.
◼
▶
Driving profile: - Setting the vehicle acceleration when
the ACC is switched on (this setting is made for
vehicles with driving mode selection
Last distance selected Switching on/off the last distance
▶
range selected
Distance: - Setting the distance to vehicles in front
▶
▶
Road layout preview - Switching cruise control on/off
according to the road profile (e.g. reducing speed
before a bend)
Speed limit preview - Switching the cruise control
▶
on/off according to the permissible speed
137
» page
126)