Table of Contents
Advertisement
38 Seats, steering wheel and mirror ›
rior mirror position for reverse driving must be re-
stored.
Driver's seat - boarding aid function
Depending on the equipment, the vehicle can have a
boarding aid function.
When the driver's door is opened, the seat moves in-
to a position that enables easy entry.
The seat returns to the set position as soon as the
door is closed and the ignition is switched on.
The seat moves into a position that allows getting off
easily as soon as the ignition is switched off.
This function can be activated in the following menu
in the Infotainment system.
Interior Seats
Or:
Interior Seats
Seat massage function
Turn on/off
Variant 1
Variant 2
›
Press
the button.
Function switches off automatically after 10 minutes.
CAUTION
Only switch the function on and off when the vehi-
▶
cle is stationary.
Seat massage function
Rear seats
Fold the backrests forward
Before folding down
›
Insert the rear headrests as far as they will go or
remove them.
›
Adjust the position of the front seats so that they
are not damaged by the folded backrests.
›
Pull the outer seat belt to the side trim.
Folding forwards from the passenger compart-
ment
Folding forwards from the boot
Fold back
›
Press the release han-
dle and fold the seat
back forward.
›
Pull on the lever.
The seat back is un-
locked and partially fol-
ded forward.
›
Pull the outer seat belt
to the side trim.
›
Fold back the seat
back.
The release handle must
audibly click into place.
›
Check the locking of
the seat back. The pin
A must not be visi-
A
ble.
Advertisement
Table of Contents
