Variant 2
Fold up
Variant 1
Variant 2
Remove and insert
Remove
›
Remove the luggage compartment cover.
›
Take out the folded pocket in an upwards direc-
tion.
Insert
Variant 1
Storage space and interior equipment ›
›
Fold down the front
hooks on both sides of
the luggage compart-
ment.
›
Separate the rear bar
by turning it in the di-
rection of the arrow
and place it on the
hooks.
›
Remove the rear bar
from the recesses.
›
Place the rear bar on
the front bar and fold
the two bars together
by turning them.
›
Remove the rear bar
from the hooks.
›
Place the rear bar on
the front bar and fold
the two bars together
by turning them.
›
Place the end of the
bar
on the bracket
A
B.
›
Proceed in the same
way on the left side.
Variant 2
Stow the bag under the variable loading floor
›
Take out the variable loading floor.
Or:
›
Unfold the variable loading floor in the upper posi-
tion and lift it in the rear area.
Net partition
Fasten the net partition
Unfold / fold
The folded net partition can be stowed under the
variable loading floor.
Net partition
175
›
Insert with
marked
end of the bar in the
right holder and
in
the left holder.
›
Insert the bag in the
recesses in the side
partitions.
If the multifunctional
bag and the roll-up
cover are stowed away
at the same time, the
roll-up cover in the
front area must cover
the multifunctional
bag.
›
Open the arms of the
crossbar until you hear
the safety button click
into place.
›
Press the safety button
and fold the arms of
the crossbar.