Connecting The Pneumatic System - Kemppi A7 Operating Manual

10.12 Connecting the pneumatic system

For the supply, a compressed-air hose with a min. internal diameter of 6 mm is required;
it is fastened to the housing by means of a screw connection (not included in the
delivery). A compressed-air shutoff valve in the supply line is recommended. This allows
the Robot Gun Cleaning Station to be depressurized quickly and simply, for carrying
out any installation and maintenance work.
Figure 22: Connecting the pneumatic system
23
© Kemppi Oy 2016 Robot Gun Cleaning Station 1616