3-3. [Pivot] IER-F + IER-F Extension (Up to Down)
• Fasten the installed Frame F Pivot and two Frame F Pivots to install on the JIG.
• Align the JIG Stud with the JIG hole of the Frame. (without using the JIG screws)
• Fasten the Frame F Pivot to the wall with screws.
Case ③ Installation
Fig 10. Studs for Extension (Up to Down)
Installed Frame F Pivot
Frame F Pivot to install
Fig 11. Fastening the JIG F Pivot Extension (Up to Down)
Samsung Electronics
Fig 12. IER-F installed at the bottom of IER-F
③
10